TL;DR: Intrusion dealers can add video by building networking skills (IP addressing, PoE budgets, VLAN basics, and safe remote access), choosing a business model (cloud video with a recurring fee or a local NVR sold as a one-time system), and starting with a small job of 4 to 8 PoE cameras in a single building. The customer relationship and the monitoring account are already in place, so video becomes an add-on to accounts the dealer already holds.
Customers who trust you with their alarm system are already asking about cameras. Some dealers subcontract that work and some turn it down. This guide covers what changes when you take it on yourself.
You already have the customer
Video is the natural next step for an intrusion dealer because the hardest part of a video business, the customer relationship, is already in place. You know the building, the owner, the entry points, and the hours. You may already hold a monitoring account and a service contract.
That gives you a head start on a new video installer:
- Site knowledge. You’ve walked the building, pulled wire through its ceilings, and know where the panel and network closet sit.
- Trust. The owner already calls you when something goes wrong. Adding cameras is a shorter conversation than winning a new account.
- An existing billing relationship. If you sell video as a service, it can ride on the account you already invoice.
We’ve covered the same move into other categories in how to expand from security panels into fire alarm installation and how to expand from security installs into AV. Video is the step most intrusion dealers take first.
The skills gap is networking
The biggest gap for most intrusion installers moving into video is networking, not cameras. Mounting cameras and pulling cable will feel familiar. Getting a camera powered, recording, and viewable from a phone without exposing the customer’s network is the new part.
Four areas cover most of what a first video job needs:
- IP addressing. Every camera and recorder needs an address on the network. Learn static vs. DHCP addressing and subnets, and document what you assign so the next service call doesn’t start with a network scan.
- PoE budgets. A PoE switch has one total power budget shared across all its ports, and each port has its own maximum based on its PoE standard. Some switches reserve the full class maximum a camera reports, not what it draws, so a camera that pulls 7.5 W can still tie up 15.4 W of budget, according to TRENDnet. Add up the cameras’ class or maximum power figures and compare the total to the switch’s budget before you order.
- VLAN basics. A VLAN keeps camera traffic logically separate from the business’s computers and phones. On a small job, a dedicated PoE switch for cameras can do a similar job. Know enough to talk it through with the customer’s IT person.
- Remote access done safely. Owners want to see cameras from a phone. Rather than opening inbound ports on the customer’s firewall, use the manufacturer’s cloud relay or P2P service, or a cloud video platform, to handle remote viewing.
Cybersecurity basics belong on every job. The UK National Cyber Security Centre, in guidance shared by CISA, recommends three steps for internet-connected cameras: replace the factory default password with a strong, unique one; install software updates promptly; and turn off remote access when it isn’t used. Build those into your install checklist and your service visits.
For a deeper start on the network side, read Before You Wire the Rack: three networking decisions every security contractor needs to make. For cable, see our guide to Cat5e vs. Cat6 vs. Cat6A for PoE camera installs.
Cloud video vs. local NVR: two business models
Cloud video and local NVR systems are two different businesses: cloud video tends to create a recurring service fee, and a local NVR is usually sold as a one-time system with optional service. Neither is the right answer for every customer. The site, the budget, and how you want to get paid decide it.
| Factor | Cloud video | Local NVR |
|---|---|---|
| How you get paid | Recurring monthly or annual service fee | One-time equipment and labor sale, plus any service contract |
| Where video is stored | Cloud, sometimes with on-camera or on-site backup | On the recorder at the site |
| Upfront cost to customer | Often lower hardware cost, ongoing fee | Higher upfront cost, lower or no ongoing fee |
| Remote viewing | Built into the platform | Through the manufacturer’s app or cloud relay |
| Internet dependence | Upload bandwidth matters | Recording continues if the internet drops |
| Fits well when | You already bill monitoring and want video on the same account | The customer wants to own the system or upload bandwidth is limited |
Features, storage options, and pricing vary by platform and manufacturer. Check the specific product before quoting.
Dealers who already bill recurring monitoring often lean toward cloud because it fits how they bill; others offer both. Some platforms blur the line: Alarm.com’s commercial offering includes cloud-managed video and an on-site recorder for up to 16 cameras, according to Alarm.com.
Your first video job
A good first video job is 4 to 8 PoE cameras in a single building, recording to one NVR or a cloud platform. That size is large enough to learn the network side and small enough to finish without a crew you don’t have yet.
A first-job profile that keeps risk low:
- Camera count: 4 to 8 cameras.
- Building: One building, no runs between structures.
- Power: PoE from a single switch or an NVR with built-in PoE ports.
- Recording: One NVR or one cloud platform, not a mix.
- Customer: An existing alarm account you know well, ideally a small business with a clear goal such as covering entries, the register, or the parking lot.
Avoid long outdoor runs, runs past the 100-meter Ethernet channel limit, PTZ cameras, and jobs where the customer’s IT team has strict network rules until you have a few installs behind you.
Pick one camera line and one recorder or platform and learn them well. Our IP camera selection guide for commercial security integrators walks through the specs that matter.
Licensing and compliance
Licensing for video installation varies by state, so check with your state’s licensing regulator before you take on camera work. Some states license security and low-voltage work under one category; others treat video differently. Your current intrusion license may or may not cover it. Your state regulator is the source to confirm what applies.
Government and government-funded jobs carry another requirement. Section 889 of the fiscal year 2019 National Defense Authorization Act restricts video surveillance and telecommunications equipment from five named companies, including Hikvision and Dahua for video, plus their subsidiaries and affiliates, according to the Security Industry Association. The rules apply to federal contractors and to purchases made with federal grant and loan funds. If a job involves a federal agency, a federal contract, or federal funding, ask about NDAA requirements before you spec cameras and recorders, and confirm compliance with the manufacturer.
Bundling video with existing accounts
The most direct path to video revenue is adding cameras to alarm accounts you already hold, through the platform you already use. Many intrusion dealers already run their accounts on Alarm.com or a similar interactive services platform. Those platforms often support video on the same account and the same customer app.
Practical upsell paths:
- Entry and alarm-zone coverage. Offer cameras that cover the doors and areas tied to existing alarm zones.
- Same app, same bill. If your platform supports video, the customer sees cameras next to arming and disarming, and you add a line to an existing invoice.
- Service visits. Battery swaps and inspections are a natural time to talk about cameras.
- Takeover and upgrade accounts. When you take over or upgrade a panel, quote video as part of the new system.
Check your platform’s dealer resources for supported cameras and plans before you quote.
How a distributor shortens the learning curve
A distributor with trained counter staff and vendor relationships can shorten the time it takes to get comfortable with video. Security Data Supply doesn’t install anything. The installation is your work as the licensed contractor. Your SDS franchise team is trained on the equipment and can help with the parts of the job that are new.
- Counter spec help. Bring the camera count, building layout, run lengths, and recording plan. The team can help you match cameras, switches, recorders, cable, and power to the job.
- Vendor training days. Manufacturers run training events at franchises. Check Security Data Supply training and events for what’s coming up near you; schedules can vary by franchise.
- Cross-category buying. Your intrusion parts, cameras, network gear, and cable can come from one account. See why contractors buy across categories from one distributor and how security contractors expand revenue streams.
Browse the video surveillance and IP camera category to see the lines available, then ask your local franchise what they stock.
Ready to quote your first camera job? Bring the site details to your SDS franchise team.
Frequently asked questions
How do alarm dealers add video surveillance to their business?
Alarm dealers add video by learning networking basics, choosing a cloud or local NVR business model, and starting with a small job of 4 to 8 PoE cameras for an existing account. Selling video to customers you already monitor shortens the sales cycle.
What do intrusion installers need to learn to install IP cameras?
Intrusion installers mostly need networking skills: IP addressing, PoE power budgets, VLAN basics, and safe remote access. Mounting and cabling will feel familiar. Cybersecurity steps such as changing default passwords and keeping firmware current belong on every install.
Is adding video surveillance profitable for alarm companies?
It can be, and the model you choose shapes how. Cloud video usually adds a recurring service fee to an account you already bill, while a local NVR is typically a one-time system sale plus optional service. Your pricing, labor, and customer mix determine the result.
Do I need a special license to install security cameras?
It depends on your state. Some states cover camera work under an existing security or low-voltage license and others handle it differently. Check with your state’s licensing regulator before taking on video work.
What networking skills do security installers need for IP cameras?
Security installers need to assign and document IP addresses, calculate a PoE switch’s power budget against the cameras’ power classes, understand VLANs well enough to separate camera traffic, and set up remote viewing without opening inbound ports on the customer’s firewall. Manufacturer cloud relay or P2P services handle remote access on many systems.
Should I sell cloud video or local NVR systems?
Sell the model that fits the site and your business. Cloud video fits dealers who already bill recurring monitoring and sites with enough upload bandwidth. A local NVR fits customers who want to own the system or sites with limited internet, and recording continues if the connection drops.
What’s the easiest first video job to take on?
A small job is the easiest start: 4 to 8 PoE cameras in a single building, recording to one NVR or one cloud platform, for an existing alarm customer. Avoid long outdoor runs, PTZ cameras, and runs between buildings until you have a few installs behind you.
About the author
Ron Broussard is Chief Executive Officer of Security Data Supply and has more than 30 years of experience in the security industry. He has held executive leadership roles across distribution and manufacturing, giving him a broad perspective on the challenges contractors, integrators, and distributors face every day. At Security Data Supply, he guides the company’s franchise network, vendor relationships, and long-term growth strategy.
Methodology
This guide draws on Security Data Supply’s distribution experience across its franchise network, along with published guidance on PoE power budgets, camera cybersecurity, and Section 889. It is general business and technical guidance, not legal or licensing advice. Product availability, training schedules, and support can vary by franchise. Confirm licensing with your state regulator, NDAA requirements with the contracting agency and manufacturer, and technical details with the manufacturer and project specification.
Sources and further reading
- Security Industry Association: Section 889 Compliance
- CISA: NCSC Releases Advisory on Securing Internet-Connected Cameras
- TRENDnet: How PoE Device Class Affects Your PoE Budget
- Alarm.com: Business Security Cameras
- Video Surveillance & IP Cameras
- How to Expand From Security Panels Into Fire Alarm Installation
- How to Expand From Security Installs Into AV: What Contractors Need to Know
- IP Camera Selection Guide for Commercial Security Integrators
- Before You Wire the Rack: Three Networking Decisions Every Security Contractor Needs to Make
- Cat5e vs. Cat6 vs. Cat6A for PoE Camera Installs: How to Choose
- How Security Contractors Expand Revenue Streams
- Buying Across Categories From One Distributor
- Training and Events
- Security Data Supply: Find Your Local SDS